The Aircraft LedgerCheck a tail

Tail record, Gulfstream G650, San Marino register

T7-CNC: how this Gulfstream G650 is flown

8 tracked flights in the 12 months to 31 Jul 2026, on about 2 days a month and an estimated 18 hours in the air.

Unlock the full report, $395See a sample report

Figures are for the twelve months to 31 Jul 2026; named aircraft are shown a week behind. Grades compare its record since 1 Jan 2025 with every tracked G650.

01

How T7-CNC compares.

8 tracked flights in the twelve months to 31 Jul 2026.

Tracked flights

8

in the twelve months, about 1 a month

Days flown a month

2.0

in the months it flew

Estimated hours

≈18

in the twelve months, from time in the air

02

Month by month.

Its busiest month was September 2025, with 4 flights.

Tracked flights

Its busiest month was September 2025, with 4 flights. It did not fly in August 2025. The record has 5 tracking gaps, so about one flight in 2 may be missing and every count is a minimum.

Source: The Aircraft Ledger, flight data for T7-CNC, the twelve months to 31 Jul 2026. Flight counts only: airports and exact dates are left out of this page.

03

The free chapter.

Each measure against all 510 tracked G650s. The shaded band is the middle half; the gold dot is T7-CNC.

Chapter 1

Fatigue

Not graded

How short were its legs?

Utilization isn’t graded for T7-CNC: too few of its flights were tracked to count its use fairly, in the full report too. So its free chapter here is Fatigue, which doesn’t depend on catching every flight.

Not compared: no percentile for this aircraft yet.

  • Hours per landingLead measure. Not compared: no percentile for this aircraft yet.

    2.2 : 1Not compared

  • Short hopsNot compared: no percentile for this aircraft yet.

    50%Not compared

  • Leg lengthExplains the hours per landing; not graded twice.

    356 nmContext, not graded

Harsher means harder on the aircraft than three quarters of G650s; typical is the middle half. Percentiles compare this aircraft with every tracked G650, over its record since 1 Jan 2025.

04

What only the report shows.

The fleet is shown, and whether T7-CNC sits inside its middle half. Its grades and values are in the full report.

Chapter 2

Corrosion

Salt air, middle G650: 4%

Also graded: damp air, freeze–thaw, near the coast and moisture in the air.

Not graded: not enough data.

Unlock this chapter

Chapter 3

Engines and brakes

Short runways, middle G650: 26%

Also graded: hot, high takeoffs; density altitude; dust and dry climate.

Not graded: not enough data.

Unlock this chapter

Chapter 4

Utilization

Flights a month, middle G650: 5.6

Also graded: days flown a month and estimated hours a year.

Not graded: too few of its flights were tracked.

Unlock this chapter

05

The full report on T7-CNC.

All four chapters, every flight since January 2025 leg by leg, and the one thing to ask the seller.

TailCheck report

T7-CNC, Gulfstream G650

$395one aircraft

  • All four chapters, graded
  • The one thing to ask, with records to request
  • Every flight since January 2025, leg by leg
  • Its weekly and seasonal rhythm
  • PDF, CSV and a share link; open for three months, kept up to date
Unlock the full report

See a sample report first

Weighing it against other G650s? Put it on a Spotlight board with up to four others. Included with Unlimited, $995 a month.

06

Questions about T7-CNC.

Cite this data

The Aircraft Ledger. “T7-CNC: how this Gulfstream G650 is flown.” Data through 31 Jul 2026. theaircraftledger.com/aircraft/t7-cnc

How many hours does T7-CNC fly a year?

About 18 estimated hours in the 12 months to 31 Jul 2026, across 8 tracked flights. Hours are estimated from time in the air, so the logbook has the exact figure.

How often is T7-CNC flown?

T7-CNC made 8 tracked flights in the 12 months to 31 Jul 2026, about 1 a month, and flew on about 2 days in each month it flew.

Does T7-CNC fly internationally?

2 of its 8 tracked flights in the 12 months to 31 Jul 2026, 29%, crossed a border.

When did T7-CNC last fly?

It was last tracked in December 2025. We publish an aircraft’s flights seven days after they happen, and show them by month only.

Why don’t you show which airports T7-CNC uses?

We leave out airports, bases and exact dates on purpose. We show how an aircraft has been used, not where it goes.

What’s in the full TailCheck report for T7-CNC?

All four graded chapters (Fatigue, Corrosion, Engines and brakes, and Utilization), each against the tracked G650s, plus the operational summary and operating rhythm, as a PDF, CSV and share link. It costs $395, or $995 a month for unlimited reports and Spotlight.

Fleet statisticsWhat’s normal for a Gulfstream G650Buyer’s guideWhat to check before buying a used G650SpotlightCompare T7-CNC with other G650s

Method: flight data, every count a minimum. Estimated hours from time in the air. About our data

Owners and operators can ask us not to publish an aircraft. Data policy and opt-out

Not a substitute for a pre-purchase inspection or records review. TailCheck shows how an aircraft has been used, not its condition.